Residential · Jacksonville, FL
A concrete pool deck should feel solid underfoot, drain correctly, and stay slip-resistant in wet conditions. Jacksonville Concreters has served Jacksonville since 2017, installing and replacing pool decks with proper base prep, clean joint layouts, and finishes that fit your pool area.
Prep and base work make or break a concrete pool deck, so we start with layout, elevations, and drainage. We excavate to proper depth, remove soft spots, and compact the subgrade with a plate compactor. A typical build-up includes 4-6 inches of compacted #57 limestone or FDOT limerock base with geotextile fabric where soils are unstable, then forms and reinforcement (fiber mesh, #3 rebar, or 6x6 W1.4 welded wire mesh depending on the slab size and loading). Before the pour we set control joints and isolation joints at the pool coping and any fixed structures to reduce random cracking.
Florida heat, frequent rain, and pool chemicals demand the right mix and finish. We place a 3,500-4,000 psi air-entrained mix when specified, keep water-cement ratios in check, and use proper curing so the surface does not dust or scale. For traction we commonly install a broom-finish or light salt-finish, and we can add a slip-resistant broadcast additive for extra grip near steps and tanning ledges. We also plan movement and drainage with a consistent slope (about 1/8-1/4 inch per foot) away from the pool to help prevent standing water, algae staining, and slick spots.
Jacksonville customers choose us because we treat pool-deck concrete like a system, not just a pour. You get a licensed and insured contractor who explains thickness, reinforcement, joint spacing, and finish options before work starts, then documents changes in writing. Our crews show up with the right equipment for tight access, including skid-steer support when needed, concrete saws for clean control joints, and professional edging and floating tools for a consistent look. If you are replacing an old deck, we handle demolition, haul-off, and tie-ins to existing patios or walkways so the finished grade and drain paths make sense.
At closeout we walk the deck with you and confirm slope, trip-free transitions, joint placement, and the agreed finish texture. You receive a clear care plan for curing and first use, including when to remove barriers, when to start light foot traffic, and when to add furniture, grills, or planters. We also review optional next steps like sealing for stain resistance, caulked expansion joints at coping, and adding matching concrete pads for equipment or outdoor showers. The goal is a concrete pool deck that drains, grips, and holds up, without surprises after the forms come off.
Yes. We provide a free written estimate with scope details such as demolition, base prep, reinforcement, concrete thickness, finish type, and curing recommendations.
Yes. We handle demolition and haul-off, re-grade and compact the subbase, then form and pour the replacement slab with planned joints and a finish matched to your needs.
Common options include broom-finish for traction, smooth trowel where appropriate, and decorative stamped concrete with color options. We will recommend a finish based on slip resistance, drainage, and how you use the surface.
Hairline cracking is common as concrete cures and moves with temperature and moisture changes. Proper base prep, reinforcement, and control-joint layout help manage where cracks form and how they behave over time.
Yes. We commonly handle pads, sidewalks, approaches, and targeted repairs, and we can plan around business hours and access constraints when needed.
If your pool deck is cracked, uneven, or slick when wet, a new concrete pool deck can improve safety, drainage, and the look of the entire backyard. Jacksonville Concreters installs new pool decks and replaces failing slabs with base preparation, reinforcement, and finishes chosen for wet traffic and Florida weather. We can match existing flatwork or redesign the layout to improve slopes, add walking room, and reduce trip hazards around coping, drains, and equipment pads.
A quality concrete pool deck starts below the slab. We remove unsuitable material, compact the subgrade, and install a stable base layer such as #57 stone or limerock, adjusted for site conditions. Forms are set for consistent thickness and clean lines, then we place reinforcement as specified for the project. During the pour we pay close attention to grade, especially where the deck meets coping, screen enclosures, steps, and existing patios, so water sheds correctly and transitions stay comfortable under bare feet.
Finish selection matters as much as strength. For many pool areas, a broom-finish provides reliable traction with a simple, classic look, while a light salt-finish can add texture and visual interest. We can discuss integral color, tinted sealers, and slip-resistant additives where homeowners want extra grip or easier cleaning. Chemical exposure from chlorine or salt systems is also part of the plan, which is why correct curing, jointing, and optional sealing are discussed up front.
Whether you need a full replacement or a new pour for a new pool build, we keep the process straightforward with a written scope, a clear timeline, and a final walkthrough. If you are comparing quotes, ask about base thickness, compaction method, concrete psi, reinforcement type, joint spacing, and the planned finish. Those details are what separate a concrete pool deck that holds up for years from one that starts cracking and staining too soon.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Jacksonville. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
