Commercial · Jacksonville, FL
A concrete curb and gutter system controls runoff, protects pavement edges, and keeps parking lots and drive lanes from raveling. Jacksonville Concreters has served Jacksonville since 2017, building formed and poured curbs, integral gutters, and tie-ins that drain clean and finish sharp.
Good curb and gutter starts below grade. We begin with layout and grades using a laser level, then excavate to the required depth and width so the curb face, gutter pan, and back-of-curb thickness stay consistent. Subgrade gets proof-rolled and re-compacted, then we place a compacted crushed stone base where needed (typically 4-6 inches) to reduce pumping and settlement. Before concrete, we set stringlines and forms, install dowels or rebar per plan, and confirm transitions at inlets, radii, sidewalks, and drive approaches.
Northeast Florida rain, sandy soils, and heavy turns from delivery trucks can expose weak edges fast, so we prioritize drainage slope, jointing, and durable surfaces. We pour air-entrained or non-air-entrained mix as specified, commonly 3,500-4,000 PSI, and consolidate with vibration where forms and geometry require it. Control joints are cut or tooled to manage shrinkage cracking, and expansion joints are installed at tie-ins and long runs where movement is expected. Finish options include broom-finish on the gutter pan for traction, clean trowel on the curb face where appropriate, and neat radii and returns that match the site plan and ADA routes.
Customers choose Jacksonville Concreters because our crews build curb and gutter to grade, not just to the eye. We provide a clear written scope, verify elevations against existing asphalt and storm structures, and keep access and safety in mind around active businesses and parking areas. Licensed and insured, we handle concrete removal and haul-off, base repair, forming, steel placement, and pour scheduling with the ready-mix supplier. You get straightforward communication, practical details on drainage and tie-ins, and work that is set up to pass inspection and hold up to traffic.
After placement, we walk the line with you and check flow paths, edge alignment, and transitions at aprons, crosswalks, and inlets. We protect fresh concrete with proper curing methods (curing compound or wet cure when specified), sawcut joints on time, and keep the site clean for reopening. Before we leave, you receive a final review of the installed lengths, joint locations, and any as-built grade notes, plus curing and traffic-return guidance. The result is a concrete curb and gutter that sheds water correctly, protects your pavement investment, and looks consistent from start to finish.
Yes. We provide a free written estimate with scope details such as demolition, base prep, reinforcement, concrete thickness, finish type, and curing recommendations.
Yes. We handle demolition and haul-off, re-grade and compact the subbase, then form and pour the replacement slab with planned joints and a finish matched to your needs.
Common options include broom-finish for traction, smooth trowel where appropriate, and decorative stamped concrete with color options. We will recommend a finish based on slip resistance, drainage, and how you use the surface.
Hairline cracking is common as concrete cures and moves with temperature and moisture changes. Proper base prep, reinforcement, and control-joint layout help manage where cracks form and how they behave over time.
Yes. We commonly handle pads, sidewalks, approaches, and targeted repairs, and we can plan around business hours and access constraints when needed.
If your asphalt edges are breaking down, water is ponding in drive lanes, or your parking lot drains toward buildings, a properly graded concrete curb and gutter system can solve it. Jacksonville Concreters installs new curb and gutter and replaces failed runs for commercial sites, HOAs, and residential developments, focusing on correct slope, strong base support, and clean tie-ins to storm drains, aprons, and sidewalks. Our work includes demolition, excavation, compacted base, forming, reinforcing steel, concrete placement, jointing, finishing, and curing, with clear scheduling and a written estimate.
A quality concrete curb and gutter project is part drainage work and part structural edge protection. We verify elevations, set stringlines, and build forms so the gutter pan carries water to inlets without birdbaths. Where the curb meets existing pavement, we plan the transition and thickness so the asphalt edge is supported and less likely to unravel under turning loads. Reinforcement and doweling are installed as specified to keep sections aligned, and control joints are placed and cut on schedule to reduce random cracking.
Finish and curing matter as much as the pour. We keep the gutter pan texture consistent, keep edges tight, and protect the fresh concrete so it gains strength evenly. You will also get practical guidance on when light foot traffic and vehicles can return, and what to avoid during the cure period.
Whether you need a short replacement at a failed corner or long runs around a parking lot, we can help you plan the scope, phasing, and drainage details. Request a free written estimate for concrete curb and gutter installation or replacement, and we will review your grades, tie-ins, and options for a durable, clean-looking result.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Jacksonville. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
