Commercial · Jacksonville, FL
Protect storefronts, equipment, and pedestrians with properly engineered concrete bollard installation from Jacksonville Concreters, serving customers since 2017. We install fixed and removable bollards for parking lots, loading areas, sidewalks, and commercial entrances, built to handle real impact risk without cracking or leaning.
Every durable bollard starts with layout, utility checks, and the right base. We confirm bollard spacing and setback, mark the centerline, and coordinate 811 locates before augering or coring. For new installs we typically drill an 8-12 inch diameter hole and excavate to a depth that matches the protection requirement and soil conditions, then place a compacted crushed-stone base (often 4-6 inches) for drainage and bearing. Steel pipe bollards are set plumb, braced, and filled with concrete, then we pour a high-strength concrete footing, consolidate with vibration, and finish to shed water.
Jacksonville-area heat, heavy rain, and sandy soils make drainage and corrosion protection non-negotiable. We use concrete mixes that fit the exposure, commonly 4,000 psi with fiber reinforcement as needed, and we maintain proper cover around the steel to reduce rust staining and spalling. At grade, we form a clean collar or small dome to keep runoff away from the post, then apply the finish you need, broom-finish, light trowel, or a flush patch to match surrounding sidewalks and pads. If the site calls for it, we install sleeves for removable posts, set caps, and add surface sealers to reduce water intrusion and curb chemical staining.
Customers choose us because we treat bollards like safety infrastructure, not an afterthought. Our crews are licensed and insured, show up with the right equipment (core drill, skid steer or mini-excavator, plate compactor, laser level), and install to consistent tolerances so rows look straight and spacing is uniform. You get practical guidance on pipe diameter, wall thickness, embedment depth, and whether a fixed, removable, or surface-mount solution fits the risk and the slab you have. We keep work areas controlled, minimize downtime for storefronts and warehouses, and communicate clearly with property managers, GC teams, and owner-operators.
After the pour, we walk the site with you and verify alignment, height, and clearance for doors, ADA routes, and deliveries. You receive a written scope, concrete details (mix strength and reinforcement if used), and care instructions, including curing time and when it is safe to reopen traffic around the posts. We also handle patching around cores, cleanup, and optional add-ons like reflective bands, bollard covers, and repainting schedules for high-visibility areas. If you are adding multiple lines of defense, we can phase the work, document locations, and plan future expansions so the property stays consistent.
Yes. We provide a free written estimate with scope details such as demolition, base prep, reinforcement, concrete thickness, finish type, and curing recommendations.
Yes. We handle demolition and haul-off, re-grade and compact the subbase, then form and pour the replacement slab with planned joints and a finish matched to your needs.
Common options include broom-finish for traction, smooth trowel where appropriate, and decorative stamped concrete with color options. We will recommend a finish based on slip resistance, drainage, and how you use the surface.
Hairline cracking is common as concrete cures and moves with temperature and moisture changes. Proper base prep, reinforcement, and control-joint layout help manage where cracks form and how they behave over time.
Yes. We commonly handle pads, sidewalks, approaches, and targeted repairs, and we can plan around business hours and access constraints when needed.
Concrete bollard installation is one of the simplest ways to reduce vehicle intrusion risk and protect people, doors, storefront glass, utilities, and loading zones. Jacksonville Concreters installs fixed and removable bollards for commercial properties and multi-family sites, using proper excavation or core drilling, stable base prep, and high-strength concrete footings so posts stay plumb and resist impact. Whether you need a single post by a roll-up door or a full row protecting a sidewalk edge, we build to the site conditions and the protection goal, not a one-size-fits-all shortcut.
Most failures come from shallow embedment, poor compaction, or water sitting at the base. We prevent that by checking utilities first, then drilling to an appropriate diameter and depth, placing a compacted gravel base when needed, and consolidating concrete around the post to eliminate voids. For removable systems, we set sleeves square and true so posts drop in cleanly without rocking. When we tie into existing slabs, we focus on a neat cut, proper patch bonding, and a finish that matches the surrounding concrete.
Finish and visibility matter, especially near pedestrian areas and drive lanes. We can leave a simple, durable concrete collar at grade, form a slight slope for drainage, and coordinate safety colors, reflective tape, or protective covers depending on the use. If your site has irrigation, downspouts, or frequent wash-down, we will recommend practical steps like sealing or adjusting grade to keep water off the base.
For pricing and scheduling, we provide a free written estimate with clear quantities, bollard type, and scope. If you are working under a GC or facilities plan, we can coordinate access and phasing to keep tenants and deliveries moving while the concrete cures. When you are ready, we will confirm locations, set the posts, pour the footings, and leave you with a clean install built to last.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Jacksonville. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
